- Home
- Power ICs
- EZBuck™ DC-DC Buck Regulators
- AOZ22701QI
AOZ22701QI
EZBuck™ DC-DC Buck Regulators
The AOZ22701QI is an I2 C controllable, high efficiency, easy-to-use DC-DC synchronous buck regulator capable of operation from a 6.5V to 28V input bus. Ability to control the output voltage using the I2 C bus simplifies converter design for microprocessors or SoCs that require dynamic voltage scaling or voltage margining. The device is capable of supplying 4A of continuous output current with an output voltage adjustable from 0.7V to 1.15927V (±1.0%).
- Datasheets
- Markings
- Package
- Reliability Reports
- Tape & Reel
Features
- Wide input voltage range
- 6.5V to 28V - 4A continuous output current
- Output voltage adjustable down to 0.7 V to 1.15927V in 7.29mV
- ±1.0% output voltage accuracy for I2C control
- Low RDS(ON) internal NFETs
- 28mΩ high-side
- 28mΩ low-side - Constant on-time with input feed-forward
- Selectable PFM light-load operation
- Ceramic capacitor stable
- Power Good output
- I2C address programming
- Integrated bootstrap diode
- Cycle-by-cycle current limit
- Short-circuit protection
- Over voltage protection
- Thermal shutdown
- Thermally enhanced 4mm x 4mm QFN-22L package
Features
- Wide input voltage range
- 6.5V to 28V - 4A continuous output current
- Output voltage adjustable down to 0.7 V to 1.15927V in 7.29mV
- ±1.0% output voltage accuracy for I2C control
- Low RDS(ON) internal NFETs
- 28mΩ high-side
- 28mΩ low-side - Constant on-time with input feed-forward
- Selectable PFM light-load operation
- Ceramic capacitor stable
- Power Good output
- I2C address programming
- Integrated bootstrap diode
- Cycle-by-cycle current limit
- Short-circuit protection
- Over voltage protection
- Thermal shutdown
- Thermally enhanced 4mm x 4mm QFN-22L package
Documentation
| Title | Type | Date | File |
|---|---|---|---|
| AOZ22701QI Datasheet | Datasheets | 2023-04-12 | |
| AOZ22701QI Marking | Markings | 2023-04-12 | |
| AOZ22701QI Reliability Report | Reliability Reports | 2023-04-12 | |
| QFN4x4_22L_EP2_S | Package | 2020-03-26 | |
| QFN4x4_22L_EP2_S Tape & Reel | Tape & Reel | 2024-03-15 |
Parametrics
Status | Full Production |
Application | ±1.0% output voltage accuracy |
Min Vin (V) | 6.50 |
Max Vin (V) | 28 |
Max Output I (A) | 4 |
Min VOUT (V) | 0.70 |
Max VOUT (V) | 0.93 |
Package | QFN4x4-22L |
Control Mode | COT |
Light Load Mode | Yes |
Ultrasonic Mode | No |
External Comp | No |
VCC Supply | Internal |
Operating Freq (kHz) | 400 |
Iq (uA) | 500 |
Soft Start (ms) | 4 |
HS FET RDS(ON) (mΩ) | 28 |
LS FET RDS(ON) (mΩ) | 28 |
Max Duty Cycle | 85% |
Adj. I Limit | No |
Remote Sense | No |
Enable | Yes |
PGood | Yes |
Forced PWM | Yes |
Ripple Reduction | Yes |
Low Power Mode | No |
Protection | Selectable |
Digital Interface | I2C |
Output Discharge | No |
Package Details
| Package Name | Dimensions | Package Specifications | Packaging Method |
|---|---|---|---|
| QFN4x4_22L_EP2_S | 4.0x4.0x0.9 | Tape and Reel |