AOSMD
PRODUCTS
  
APPLICATIONS
  
DESIGN SUPPORT
  
ABOUT
  
CONTACT US

AOZ22722QI

AOZ22722QI

EZBuck™ DC-DC Buck Regulators

The AOZ22722QI is an I2C controllable, high efficiency, easy-to-use DC-DC synchronous buck regulator capable of operation from a 6.5 V to 28 V input bus. Ability to control the output voltage using the I2C bus simplifies converter design for microprocessors or SoCs that require dynamic voltage scaling or voltage margining. The device is capable of supplying 8A of continuous output current with an output voltage adjustable from 0.7V to 1.15927V (±1.0%). 

  • Datasheets
  • Package
  • Tape & Reel
Download Selected
Features
  • Wide input voltage range
    - 6.5V to 28V
  • 8A continuous output current
  • Output voltage adjustable down to 0.7 V to 1.15927 V in 7.29 mV
  • ±1.0% output voltage accuracy for I2C control
  • Low RDS(ON) internal NFETs
    - 18mΩ high-side
    - 11mΩ low-side
  • Constant on-time with input feed-forward
  • Selectable PFM light-load operation
  • Ceramic capacitor stable
  • Power Good output
  • I2C address programming
  • Integrated bootstrap diode
  • Cycle-by-cycle current limit
  • Short-circuit protection
  • Over voltage protection
  • Thermal shutdown
  • Thermally enhanced 4 mm x 4 mm QFN-22L package
Features
  • Wide input voltage range
    - 6.5V to 28V
  • 8A continuous output current
  • Output voltage adjustable down to 0.7 V to 1.15927 V in 7.29 mV
  • ±1.0% output voltage accuracy for I2C control
  • Low RDS(ON) internal NFETs
    - 18mΩ high-side
    - 11mΩ low-side
  • Constant on-time with input feed-forward
  • Selectable PFM light-load operation
  • Ceramic capacitor stable
  • Power Good output
  • I2C address programming
  • Integrated bootstrap diode
  • Cycle-by-cycle current limit
  • Short-circuit protection
  • Over voltage protection
  • Thermal shutdown
  • Thermally enhanced 4 mm x 4 mm QFN-22L package
Documentation
TitleTypeDateFile
AOZ22722QI DatasheetDatasheets2023-04-12PDF
QFN4x4_22L_EP2_SPackage2020-03-26PDF
QFN4x4_22L_EP2_S Tape & ReelTape & Reel2024-03-15PDF
Parametrics
Status
Full Production
Application
±1.0% output voltage accuracy
Min Vin (V)
6.50
Max Vin (V)
28
Max Output I (A)
8
Min VOUT (V)
0.70
Max VOUT (V)
0.93
Package
QFN4x4-22L
Control Mode
COT
Light Load Mode
Yes
Ultrasonic Mode
No
External Comp
No
VCC Supply
Internal
Operating Freq (kHz)
400
Iq (uA)
500
Soft Start (ms)
4
HS FET RDS(ON) (mΩ)
18
LS FET RDS(ON) (mΩ)
11
Max Duty Cycle
85%
Adj. I Limit
No
Remote Sense
No
Enable
Yes
PGood
Yes
Forced PWM
Yes
Ripple Reduction
Yes
Low Power Mode
No
Protection
Selectable
Digital Interface
I2C
Output Discharge
No
Package Details
Package NameDimensionsPackage SpecificationsPackaging Method
QFN4x4_22L_EP2_S 4.0x4.0x0.9PDFTape and Reel